![]() ![]() ![]() Note -> This reboot issue is fixed in the beta PC Engines APU1 BIOS apu140708 (). Add the following argument to the AstLinux KCMD line in the file: /oldroot/cdrom/os/ (or os/ when mounted as a FAT16 volume on most any OS) The APU1 hardware does not include a keyboard controller, which by default Linux uses for a “soft-reboot”. Tip -> A reboot is required for the change to take effect. Has been configured, from the CLI issue the following command: Note -> Skip this section for AstLinux 1.3.0 and later, which uses a 115200 baud rate.įor AstLinux 1.2.10 and earlier, the board type of “genx86_64-serial” defaults to a 19200 baud serial console, unfortunately the PC Engines's BIOS is fixed at 115200 baud, so if you want to view the BIOS console you must change the AstLinux serial console speed to match at 115200 baud. mnt/kd/nf # libsensors configuration file mnt/kd/rc.conf.d/nf SENSEMODS="k10temp"ĪLERT_SOUNDS="startup shutdown" # Optional Sounds ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
March 2023
Categories |